12 in. 35.8cc 4-Stroke Gasoline Engine Tree Pole Saw Pruner Gas Chainsaw

Are you still bothered by the unmanageable high branches in your yard? Then you can try our pole saw. With it, you no longer need to risk climbing up a ladder or tree to trim branches. With its powerful functions, it gets the pruning job done easily and quickly. Its compact saw head can easily reach any corner without leaving a single weed or excess leaf behind. The powerful four-stroke motor, suitable length, smooth chain, sharp blades, and stable structure can quickly trim branches and weeds for you, improving your work efficiency. It is mainly made of sturdy and durable material, which is uneasy to deform or rust. So it has a long service life and you can use it with confidence. It will be your ideal choice!

Specifications: Form: 4-stroke. Displacement: 35.8cc. Assembly Required: Yes. Telescopic Rod Length: 1.5m/4.92ft.

User-friendly Design: The goggles can effectively prevent leaves or other impurities from damaging your eyes. The protective cover can effectively prevent you from accidentally touching the chain and getting hurt.

Good Heat Dissipation: The engine housing has many cooling holes for heat dissipation, which prevents engine burn-out caused by long-term use and effectively extends its service life.

Large Capacity: The semi-clear large oil and fuel tank for convenient check allows the engine to work for long periods, so you don't have to refill the tank frequently, which is very convenient.

Thoughtful Design: Two detailed English manuals are convenient for you to quickly install and use. The ergonomic anti-slip handle and starter trigger enhance additional comfort and stability during use, significantly reducing user fatigue.

Wide Shoulder Strap: The convenient shoulder strap allows you to easily carry the product, meeting the requirements of outdoor work.

How to Install: 1, Loosen the nut and remove the side cover plate. 2, Install the chain on the sprocket so that the chain saw fits just inside the guide groove of the guide plate, paying attention to the direction of the chain cutter when installing. 3, Put the cover plate back on and lightly tighten the nut. 4, Lift up the guide plate and turn the nut to adjust the chain tension so that the chain sags lightly at the bottom. 5, Check that the chain drive is smooth and the tightness is appropriate, and re-adjust with the nut if necessary. 6, Lock the nut after the chain tightness is adjusted. 7, Add lubricating oil (not included) into the oil tank to lubricate the chain, be careful not to use waste oil or raw oil, or it will damage the oil pump.