3 Legged Thing - Winston 2.0 Tripod (Bronze)

This bronze 3 Legged Thing Winston 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 56.8" height or can be combined with the center column to form a monopod with up to 75.9" in height.

Tripod heads that are compatible with a 3/8"-16 mount can be connected to the top of the Winston 2.0 Tripod. When configured as a tripod, the Winston 2.0 Tripod supports up to 88.0 lb and measures 24.0" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 5.7" when its push-and-pull, rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 55.0" or 72.9" with the center column fully raised. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.

For added versatility, the Winston 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.

User Manual

4.2 MB

Use and Handling

Support system with three detachable legs and removable center column

Each leg can be configured as a monopod with up to a 56.8" height or can be combined with the center column to form a monopod with up to 75.9" height

As a tripod, supports up to 88.0 lb

Push-and-pull center column for rapid camera, lens, or sport optic positioning

Center column D-ring to accommodate ballast for additional stability

Can be set for a minimum height of 17.5" or 5.7" without the center column

All three legs can be extended in the tripod configuration to obtain a maximum height of 55.0" or 72.9" with the center column fully raised

Center column is reversible, facilitating low-angle photography where an attached camera is positioned among the tripod's legs instead of above them

Legs each feature 3 sections with twist locks for rapid deployment and can be independently spread

Legs can be locked at 23, 55, or 80° angles

Rubber feet help to enhance stability on a wide variety of surfaces

Weighs 3.8 lb and measures 24.0" when all three legs are reversed 180° and folded

Rubber feet can be removed and substituted with separately available 3 Legged Thing spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil

Removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod

3 Legged Thing Toolz multi-tool to adjust miscellaneous component screws

Carry bag with strap for storage and transport

Construction Details

Carbon-fiber legs

3/8"-16 mount

• This bronze 3 Legged Thing Winston 2.0 Tripod is a support system that features three detachable legs and a removable center column. Each leg can be configured as a monopod with up to a 56.8" height or can be combined with the center column to form a monopod with up to 75.9" in height.
Tripod heads that are compatible with a 3/8"-16 mount can be connected to the top of the Winston 2.0 Tripod. When configured as a tripod, the Winston 2.0 Tripod supports up to 88.0 lb and measures 24.0" when folded. Each of its 3-section legs features an independent spread, a 3-position angle lock, and twist locks for rapid deployment. As a tripod, it can be set at a minimum height of 5.7" when its push-and-pull, rapid center column is removed. Together, the three legs can be extended to obtain a maximum height of 55.0" or 72.9" with the center column fully raised. Each of the carbon fiber legs includes a removable rubber foot, which can be substituted with separately available spiked feet to further enhance stability on a wide variety of surfaces, including soft or uneven soil.
For added versatility, the Winston 2.0 Tripod's three removable legs can be substituted with separately available 3 Legged Thing footwear accessories for use as a tabletop tripod. A carry bag with strap is provided for storage and transport.