AMICO POWER 45 Amp 95-Volt to 260-Volt Wide Voltage Plasma Cutter w/ 3/5 in. Clean Cut, Power Cords Can Extend to 700 ft.

CUT-45M is a newly designed machine with the meter and adjustment knobs attached to the front of the machine; the filter is located inside the machine. This new and improved model makes it more convenient and easier to use. This is the new digitally controlled 20-55 amps Plasma Cutter Machine with advanced inverter technology and high cutting performance. Designed for portable repair work and small business project use, the CUT-45M Air Plasma Cutter cuts a thickness of 2/5 in. with the max severance thickness at 3/4 in. Specifications: Type: Air Plasma Cutter, Supply Power: AC 95-Volt to 260-Volt, 50 Hz/60 Hz, 1-Phase. Rated Input Current: 230-Volt/24.3 Amp and 115-Volt/30.4 Amp. Cutter Current Range: 230-Volt/45 Amp and 115-Volt/30 Amp. Nominal DC Open Circuit Voltage: 280-Volt, Output Voltage: 102-Volt, Duty Cycle: 60% at 45 Amp, Efficiency: 89%, Power factor: 0.93, Output Terminal Type: Direct Wire, Cooling Method: Fan Air Cooled, Gas Supply: Clean Dry Oil-Free Air, Gas Pressure Range: 30 psi to 90 psi, Recommended Gas Inlet Flow: 4.0 scfm at 90 psi, Maximum Severance Cutting Thickness: 3/4 in. Movement Speed: 10.0 in./min. Package Included: 13 Ft. (SG55/AG60) Plasma Cutter Torch Assembly, 10 Ft. 300 Amp Work Clamp Assembly, 230-Volt to 115-Volt Power Adapter, Air Filter and Pressure Gage (Installed inside the machine), Owners Manual

Incorporates advanced IGBT inverter technology with excellent Arc stability. The torch design provides a secure and comfortable grip made with heat and impact-resistant material. 95-260V wide voltage and 50/60Hz makes almost all the voltages and frequencies useable
Can cut up to 2/5 in. and is designed for demanding industrial work and construction, plus home and hobby use. It requires less work to produce an overall better result with a cleaner cut
Quick setup: NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor. The filter is located inside the machine with an automatic air control solenoid valve
Cuts stainless steel, alloy steel, mild steel, copper, aluminum, and other metal materials with ease, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes
Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, and fan dormancy. Power cords extend to 700 feet still can use normally.