California Air Tools CALAIR 60037BD 60 Gal 3.7 hp One-Stage Oil-Lubricated Electrical Belt Driven 155 PSI Air Compressor CAIR-60037BD

About This Product

The CALAIR 60037BD Continuous Run 3.7 Hp Air Compressor is designed for CONTINUOUS RUNNING up to 8 hours at 90 PSI. The CALAIR 60037BD Air Compressor has a Pump System that is designed to have a life cycle before maintenance/service of 5,000 to 10,000 hours of usage. The large 60 gallon ASME Certified steel air tank is just the right size for a shop, warehouse or factory. Ideal for Air Brushing, Bolting, Brad Nailing, Cutting, Drilling, Grinding, Finish Nailing, Framing Nailing, HVLP Painting, Hobby Nailing, Hobby Painting, Inflation, Roof Nailing, Spraying, Stapling, Trim & Impacting/Wrenching. Designed for people looking for reliable air flow in commerical and semi-rugged environments.

Highlights

3.7 Hp Motor w/Reset Switch

Belt-Driven Pump (Oil Type ISO 68 / LDAB68). 5000 to 10000 hour life. Single Stage Pump (2 cylinders)

Pressure Gauge

1/2" NP Output Valve Port

Power On/Pressure Switch

Motor Thermal Overload Protector (Trips @135C)

Working Pressure - 125 - 155 PSI

208 Volt (200v-216v) to 230 Volt (220v-240v) / 60 Hertz / Single Phase

11.5 CFM @90 PSI, 13.6 CFM @40 PSI

Continuous Run up to 8 hours (10 hours maximum)

16.7 Amp Draw

Power Requirements: Dedicated 20 amp outlet

Plug Type: NEMA 6-15P Receptacle: NEMA 6-15R or 6-20R

Maximum Operating (ambient) Temperatures: 36 to 108°F

Time to fill tank from empty to full (155 PSI) - 6 min 52 seconds

Recovery time from 125 PSI to 155 PSI - 1 min 37 seconds

60 Gallon ASME Certified Steel Air Tank

Maximum Tank Pressure 180 PSI