Grizzly Industrial 15 in. 3 HP Fixed-Table Planer

About This Product

The G0890 15 in. Fixed-Table Planer with a 3-knife cutterhead features a unique fixed table height design which allows for a permanent infeed/outfeed roller table setup. This can significantly boost efficiency in production settings. Gas struts allow you to easily lift the headstock to accommodate board thickness changes while keeping your infeed and outfeed tables in place. A 230-Volt, 3 horsepower motor powers through cuts up to 1/8 in. deep at full width or 3/16 in. deep on material up to 6 in. W. The 2-speed gearbox allows you to choose between 16 and 28 FPM for a smooth finish or high-production feed rate. The G0890 offers additional features such as a thickness scale, a large top-mounted handwheel, cabinet-style stand, cast-iron extension tables, angled dust port and magnetic switch with thermal overload protection. Like all Grizzly planers, the G0890 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty) The G0890 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the planer are available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factoryCSA certified.

About This Product

Motor: 3 HP, 230-Volt, single-phase, 12 Amp

Maximum stock width: 15 in.

Maximum stock thickness: 6 in.

Minimum stock thickness: 3/16 in.

Minimum stock length: 6 in.

Maximum cutting depth: 1/8 in.

Cutterhead diameter: 2-5/8 in.

Cutterhead type: 3-knife

Knife size/type: 15 in. x 1 in. x 1/8 in., HSS

Cutterhead speed: 5200 RPM

Feed rates: 16 FPM, 28 FPM

Table size with extensions: 15 in. x 49 in.

Dust port size: 4 in.

Footprint: 21 in. x 18-1/2 in.

Overall dimensions: 25 in. W x 49 in. L x 47-1/2 in. H

Approximate shipping weight: 375 lbs.