Milwaukee M18 FUEL 18V Lithium-Ion Brushless 1-1/8 in. Cordless SDS-Plus Rotary Hammer/Dust Extract Kit w/M18 FUEL Impact Wrench

About This Product

The Milwaukee M18 FUEL 1-1/8 in. SDS Plus Rotary Hammer with Dust Extractor Kit is the next generation of cordless rotary hammer drills delivering ultimate jobsite performance and productivity. The M18 FUEL 1-1/8 in. SDS Plus Rotary Hammer is the fastest drilling and hardest hitting rotary hammer in its class, includes AUTOSTOP Control for enhanced safety and can drill up to (50) 5/8 in. x 3 in. holes per charge when paired with the M18 HIGH OUTPUT XC6.0 Battery. This hammer drill provides maximum control and enhanced safety with the AUTOSTOP Kickback Control, which prevents over-rotation if the tool gets bound up while drilling in rebar or hard aggregate. The Milwaukee HAMMERVAC 1-1/8 in. Dedicated Dust Extractor features an inline design engineered to connect directly to and be power by the M18 FUEL 1-1/8 in. SDS Plus Rotary Hammer. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offer easy and precise adjustments. This dust extractor has OSHA Table One Compliance when drilling up to 1-1/8 in. in diameter and 8 in. in depth. This extractor features AUTOPULSE Filter Cleaning Mechanism that automatically cleans the filter after each use. The dust box comes equipped with a vacuum port for suctioning out the dust with a large vacuum or dust extractor instead of dumping the dust out into a trash receptacle.

Highlights

POWERSTATE Brushless Motor provides more power, more run-time and longer life

REDLINK PLUS Intelligence: Integrates full-circle communication between tool, battery and charger to protect from overloading, overheating and over-discharging

M18 REDLITHIUM HIGH OUTPUT XC 6.0 Battery Pack provides 50% more power and runs 50% cooler vs M18 REDLITHIUM XC battery packs

3.6 ft.-lbs. Impact Energy

ONE-KEY technology allows for tracking, tool security and inventory management

AVS Anti-Vibration System: Minimizes vibration for maximum comfort

3 Mode: Rotary Hammer, Hammer Only, Rotary Only

Includes M18 HAMMERVAC 1-1/8 in. Dedicated Dust Extractor

AUTOPULSE Filter Cleaning Mechanism cleans the dust extractor filter automatically after use

OSHA Table 1 Compliant Solution

Dust Extractor Capacity: Up to 1-1/8 in. in Diameter and Up to 8 in. in Depth

800 RPM and 4,600 BPM

Includes: 1 rotary hammer, 1 dust extractor with nozzles, two 6.0 Ah batteries, 1 charger

Includes: (1) M18 FUEL 1-1/8 in. SDS Plus Rotary Hammer w/ ONE-KEY (2915-20) (2) M18 REDLITHIUM HIGH OUTPUT XC6.0 Batteries (48-11-1865), (1) M18 and M12 Rapid Charger (48-59-1808), (1) Dust Extractor w/ Nozzles (2915-DE)

2962P-20: Pin detent locks sockets in place securely, especially while working overhead

2962P-20: 4-mode DRIVE CONTROL provides greater control over output speed and power, includes auto shut-off and bolt-removal control

2962P-20: Auto shut-off control applies no more than 35 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening

2962P-20: Bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops