Milwaukee M18 FUEL 18V Lithium-Ion Brushless 1 in. Cordless SDS-Plus Rotary Hammer/Dust Extractor Kit and M18 FUEL Impact Wrench

About This Product

The Milwaukee M18 FUEL 1 in. SDS Plus Rotary Hammer with Dust Extractor Kit is the next generation of cordless rotary hammer drills delivering users ultimate jobsite performance and productivity. The M18 FUEL 1 in. SDS Plus Rotary Hammer is the fastest drilling rotary hammer in its class, includes AUTOSTOP Control for enhanced safety and can drill up to (125) 3/8 in. x 2 in. holes per charge when paired with the M18 HIGH OUTPUT XC6.0 Battery. This hammer drill provides maximum control and enhanced safety with the AUTOSTOP Kickback Control, which prevents over-rotation if the tool gets bound up while users are drilling in rebar or hard aggregate. The Milwaukee HAMMERVAC 1 in. Dedicated Dust Extractor features an inline design engineered to connect directly to and be power by the M18 FUEL 1 in. SDS Plus Rotary Hammer. Utilizing the same replaceable certified HEPA filter as other HAMMERVACS, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offer easy and precise adjustments. This dust extractor has OSHA Table 1 Compliance when drilling up to 1 in. Dia and 6 in. D. This extractor features AUTOPULSE Filter Cleaning Mechanism that automatically cleans the filter after each use. The dust box comes equipped with a vacuum port that allows the user to suction out the dust with a large vacuum or dust extractor instead of dumping the dust out into a trash receptacle.

Highlights

Includes M18 hammervac 1 in. dedicated dust extractor

Autopulse filter cleaning mechanism

OSHA table 1 compliant solution

Dust extractor capacity: up to 1 in. Dia and up to 8 in. D

AVS anti-vibration systems

2 ft. lbs. impact energy

3 mode: rotary hammer, hammer only, rotary only

Powerstate brushless motor

Redlink plus intelligence: integrates full-circle communication between tool, battery and charger to protect from overloading, overheating and over-discharging

M18 redlithium high output XC6.0 battery pack provides 50% more power and runs 50% cooler vs M18 redlithium XC battery packs

1,330 RPM

4,800 BPM

one M18 fuel 1 in. SDS plus rotary hammer (2912-20), two M18 REDLITHIUM high output XC6.0 battery pack (48-11-1865), one M18 and M12 rapid charger (48-59-1808), one M18 FUEL HAMMERVAC 1 in. dedicated dust extractor (2912-DE)

2962P-20: pin detent locks sockets in place securely, especially while working overhead

2962p-20: 4-mode drive control provides greater control over output speed and power, includes auto shut-off and bolt-removal control

2962P-20: auto shut-off control applies no more than 35 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening

SHOP ALL MILWAUKEE PRODUCTS

2962P-20: bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops