Milwaukee M18 FUEL ONE-KEY 18V Lithium-Ion Brushless Cordless 1-1/4 in. SDS-Plus D-Handle Rotary Hammer Kit with Impact Wrench

About This Product

Milwaukee M18 FUEL 1-1/4 in. SDS Plus D-Handle Rotary Hammer with ONE-KEY delivers on the drill speeds normally associated with SDS Max rotary hammers. The hammer drills Faster ¾ in. Holes and is Lighter Versus SDS Max rotary hammers, includes AUTOSTOP Control for Enhanced Safety and can drill up to (25) ¾ in. x 4 in. Holes per Charge when paired with Milwaukee M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery. The in-line D-Handle design allows access in tight spaces and provides superior balance and ergonomics for downward drilling. POWERSTATE Brushless Motor delivers 3.65 ft-lbs of impact energy, 810 RPM and 4,650 BPM, providing the speed and power for the most demanding applications. This hammer provides maximum control and enhanced safety with the AUTOSTOP Kickback Control, preventing over-rotation if the tool binds up while drilling in concrete with rebar or hard aggregate. This tool is compatible with Milwaukee M18 FUEL HAMMERVAC 1-1/4 in. Dedicated Dust Extractor providing on-board OSHA Table One compliance. The AVS Anti-Vibration System reduces vibration for maximum comfort. The cordless rotary hammer is compatible with ONE-KEY to track the tool's location and manage inventory. The REDLINK PLUS intelligence tool technology ensures maximum rotary hammer performance and protects it from overload, overheating and over-discharge. The M18 REDLITHIUM HIGH OUTPUT XC6.0 Battery delivers 50% more power while running 50% cooler than the M18 REDLITHIUM XC batteries.

Highlights

Powerstate brushless motor delivers maximum power and long motor life

Redlink plus intelligence: integrates full-circle communication between tool, battery and charger to protect from overloading, overheating and over-discharging

M18 redlithium high output XC6.0 battery pack provides 50% more power and runs 50% cooler vs M18 redlithium XC battery packs

3.65 ft.-lbs. Impact Energy

1-key technology allows for tracking, tool security and inventory management

AVS Anti-Vibration System: Minimizes vibration for maximum comfort

3 mode: rotary hammer, hammer only, rotary only

810 RPM

4,650 BPM

Pairs with 2916-DE HAMMERVAC 1-1/4 in. dedicated dust extractor

Part of the M18 system, featuring over 200 plus solutions

Includes: (1) M18 FUEL(TM) 1-1/4 in. SDS Plus D-handle rotary hammer with one-key(2) M18 redlithium high output XC6.0 battery packs(1) M18 and M12Rapid Charger (1) Side Handle(1) Depth Gauge(1) grease tube (1) carrying case

2962P-20: pin detent locks sockets in place securely, especially while working overhead

2962P-20: 4-mode drive control provides greater control over output speed and power, includes auto shut-off and bolt-removal control

2962p-20: auto shut-off control applies no more than 35 ft./lbs. of torque for hand-tight fastening applications to prevent overtightening

2962P-20: bolt removal control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops