Photogenic AKC320 StudioMax III 320 Watt Second Constant Color Monolight 120VAC

Photogenic - AKC320 StudioMax III 320 Watt/Second Constant Color Monolight (120VAC)

Photogenic StudioMax III Three Light Basic Studio Kit 120V

Photogenic - StudioMax III Three Light Basic Studio Kit (120V)

Photogenic - StudioMax III 3-Light Portrait Studio Kit (120V)

  • 960 Total W/s
  • 3- 320 W/s Monolights
  • Umbrellas, Sync Cord, Light Stands, Case
Lease to Own at
est. $60 /week*
Availability: Out of stock
SKU
BH #PHSM3P960K (B&H Kit)

The Photogenic StudioMax III 3-Light Portrait Studio Kit includes 3 monolights each with a full 6 F-Stop power range. The AK320 is an excellent choice as a main, secondary, and background light. Since it accepts the entire line of the PowerLight reflectors, grids, snoots, and diffusers, the StudioMax III is a good investment.

This lighting kit provides a total of 960 w/s: ample power for most photographic applications. It also includes umbrellas for softening and broadening the light output, a background reflector, air cushioned light stands for support, and a soft, padded case for storage and transport.

The Photogenic StudioMax III AKC320 constant color monolight offers a full six f/stop power range over 320 watt/seconds. It has internal control to ensure the same Kelvin temperature output, no matter what level of output is chosen.

This light is an excellent choice as a main, secondary, or background light. Since it accepts the entire line of the PowerLight reflectors, grids, snoots, and diffusers, the StudioMax III is a good investment.

This monolight also comes in an AC/DC model, which allows use of the light away from sources of AC power, when a high voltage battery is added.

This Impact Air-Cushioned Light Stand is a black anodized aluminum support that rises to a height of 10' and folds down to 33.5" for storage and transport. The stand will handle up to 8.5 lb and is topped with a 5/8" stud with 1/4"-20 threads. It has a wide footprint of 38" for greater stability. Air cushioning gently lowers the light when making height adjustments to protect equipment and fingers.

This 3' Impact Back Light Stand consists of a base and riser. Use the lower part as a base to place a mounted light at floor or table level, as low as 5.5". Add the extension to the base to raise the height of the light from 22.8" (57.9 cm) to a maximum of 3' (90 cm). The stand is constructed of black anodized aluminum.

The ability to shape and control the light from a flash source is essential. This is one of many different reflectors available for the Photogenic line of flash heads and monolights. It is used for lighting a background evenly, and softly.

The black Light Kit Bag #2 (34 x 13.5 x 12") from Impact makes transporting your lighting kit easy and secure. The bag is designed to hold three monolights along with their reflectors (such as Impact VC500LR), four stands, boom, umbrellas, cables and other support gear but can also be used to hold other lighting equipment instead. You'll have plenty of room to take along enough lighting gear for a portrait session - all packed in an organized and accessible way. A touch fastened divider tray separates the stands, boom and umbrellas from the lights preventing them from bumping together and causing scratches or damage. For additional smaller equipment such as cables and small accessories, there are three interior 10.5 x 8.0" zippered mesh pockets.

The bag is made from soft, padded water-resistant nylon and contains six movable touch fastened interior dividers (6 large, 2 small) that will permit you to configure the bag to accommodate the gear you need that day. The Light Kit Bag is carried by its two 2" wide overlapping top carry handles that can easily be extended into dual shoulder straps. The contents are accessed via dual zippers that when placed together will accept a user-supplied lock. For even more protection, the bottom of the bag contains three rubber feet for when the bag is placed on the ground. And the bag folds down to a quarter of its height for convenient storage and easy setup. Whether for storage or transport, the Impact Light Kit Bag will serve both pro or amateur well.

Umbrellas soften, broaden, and diminish the light output of any flash light source. Umbrellas with a white interior will soften and weaken light more than an umbrella with a silver lining. A white umbrella without a black backing may also be used as a makeshift softbox, although the use of the light will not be as efficient as with a lightbox.

Choosing umbrella size is determined by the size of the subject, and the strength of the light supply being used. Choosing an umbrella surface is as subjective as choosing a paint and brush.

This Impact 43" White Translucent Umbrella is suggested for use in mid-length portraits for one or two persons.


Photogenic AKC320 StudioMax III 320 Watt/Second Constant Color Monolight (120VAC)


UPC: 689670111171


Impact Air-Cushioned Light Stand (Black, 10')


UPC: 847628030626


Impact Two Section Back Light Stand (3')


UPC: 847628011939


Photogenic Quick Change Shallow Satin Reflector for Photogenic


UPC: 689670070188


Impact Light Kit Bag #2 (34 x 13.5 x 12")


UPC: 847628030619


Impact Umbrella - White Translucent (43")


UPC: 847628013292

  • The Photogenic StudioMax III AKC320 constant color monolight offers a full six f/stop power range over 320 watt/seconds. It has internal control to ensure the same Kelvin temperature output, no matter what level of output is chosen.
  • This light is an excellent choice as a main, secondary, or background light. Since it accepts the entire line of the PowerLight reflectors, grids, snoots, and diffusers, the StudioMax III is a good investment.
  • This monolight also comes in an AC/DC model, which allows use of the light away from sources of AC power, when a high voltage battery is added.
  • Dial provides infinite flash power settings from full to 1/32 power.
  • Highly sensitive, switchable optical slave for synchronization with other flashes.
  • Independently Switched, to aid in positioning and focus.
  • No tools are required to replace this "plug & play" flashtube.
  • Easy to transport. Umbrella socket and stand mount built on.
  • UPC: 689670111171
More Information
Manufacturer Other Brands
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

No Related Posts