ProMediaGear TR344L 34mm Series 71 in. Pro-Stix Carbon-Fiber Tripod w/ Top Plate

This TR344L 34mm Series 71" Pro-Stix Carbon-Fiber Tripod from ProMediaGear supports up to 60 lb, measures 23.8" when folded, and includes a tripod top plate with a 3/8"-16 mount. Each of its four-section legs has a maximum diameter of 34mm. They also feature an independent spread, a three-position angle lock, quarter-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 3.8" to a maximum height of 71". For use on soft and uneven soil, each of the rubber feet can be unscrewed to access a stow-away metal spike, which can be fastened to the bottom of its corresponding foot.

Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the tripod's removable top plate, which is secured to the tripod's aluminum-alloy head using six socket screws. The aluminum-alloy head minimizes weight along with the carbon-fiber construction of the tripod legs.

Alternatively, a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with a separately-available TRB3475 75mm Tripod Bowl Insert can be installed within the aluminum-alloy head. A video tripod head that is directly compatible with the TRB3475 tripod bowl insert or the TRBU75 tripod leveling base's 3/8"-16 mount can be used with the TR344L 34mm Series 71" Pro-Stix Carbon-Fiber Tripod and oriented without adjusting the tripod's legs.

For direct attachment of accessories that feature 1/4"-20 mounts such as the included bubble level, three 1/4"-20 female accessory threads are distributed along the sides of the head. Alongside each of those 1/4"-20 accessory threads are pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mount. To enhance stability, the underside of the top plate features an accessory loop which can accommodate the included carabiner along with a separately-available ballast such as a sandbag.

User Manual

1.3 MB

Use and Handling

Supports up to 60 lb

Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the included tripod top plate, which is secured to the tripod's head using six socket screws

Alternatively, tripod accepts a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with separately-available TRB3475 75mm Tripod Bowl Insert

A video tripod head that is directly compatible with a separately-available ProMediaGear TRB3475 75mm Tripod Bowl Insert or the 3/8"-16 mount of the separately-available TRBU75 75mm Tripod Leveling Base can be used with the tripod and oriented without adjusting the tripod's legs

Can be set for a minimum height of 3.8" to a maximum height of 71"

Legs each feature four sections, twist locks for rapid deployment, and can be independently spread

Legs can be locked at 22.5°, 55°, or 89° angles

Rubber feet with stow-away, metal spikes to further enhance stability on a wide variety of surfaces, including soft and uneven soil

Included tripod bubble level

For direct attachment of accessories that feature 1/4"-20 mounts, three 1/4"-20 female accessory threads distributed along the sides of the head

1/4"-20 accessory threads along the head have adjacent pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mount

Underside of the top plate features an accessory loop which can accommodate an included carabiner along with a separately-available ballast such as a sandbag

Weighs 4.3 lb, measures 23.8" when folded

5/32 hex key to adjust tension on leg hinges and for removal or installation of tripod top plate

Construction Details

Carbon-fiber legs with a maximum diameter of 34mm

Aluminum-alloy tripod head helps minimize weight

• Supports up to 60 lb
Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the included tripod top plate, which is secured to the tripod's head using six socket screws
Alternatively, tripod accepts a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with separately-available TRB3475 75mm Tripod Bowl Insert
A video tripod head that is directly compatible with a separately-available ProMediaGear TRB3475 75mm Tripod Bowl Insert or the 3/8"-16 mount of the separately-available TRBU75 75mm Tripod Leveling Base can be used with the tripod and oriented without adjusting the tripod's legs
Can be set for a minimum height of 3.8" to a maximum height of 71"
Legs each feature four sections, twist locks for rapid deployment, and can be independently spread
Legs can be locked at 22.5°, 55°, or 89° angles
Rubber feet with stow-away, metal spikes to further enhance stability on a wide variety of surfaces, including soft and uneven soil
Included tripod bubble level
For direct attachment of accessories that feature 1/4"-20 mounts, three 1/4"-20 female accessory threads distributed along the sides of the head
1/4"-20 accessory threads along the head have adjacent pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mount
Underside of the top plate features an accessory loop which can accommodate an included carabiner along with a separately-available ballast such as a sandbag
Weighs 4.3 lb, measures 23.8" when folded
5/32 hex key to adjust tension on leg hinges and for removal or installation of tripod top plate
• Carbon-fiber legs with a maximum diameter of 34mm
Aluminum-alloy tripod head helps minimize weight