ProMediaGear TRS344L34mm Series 71" Pro-Stix Carbon Fiber Tripod with Top Plate and Compact Apex

This TR344L 34mm Series 71" Pro-Stix Carbon Fiber Tripod from ProMediaGear supports up to 60 lb, measures 23.8" when folded, and includes a tripod top plate with a 3/8"-16 mount. Each of its four-section legs has a maximum diameter of 34mm. They also feature an independent spread, a three-position angle lock, quarter-turn twist locks for rapid deployment, and a rubber foot to enhance stability on a wide variety of surfaces. Together, the three legs can be extended and spread to raise the tripod from a minimum height of 3.8" to a maximum height of 71". For use on soft and uneven soil, each of the rubber feet can be unscrewed to access a stow-away metal spike, which can be fastened to the bottom of its corresponding foot.The TRS344L features a compact apex for a leg set that folds to a more compact diameter for storage and transport. Tripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the tripod's removable top plate, which is secured to the tripod's aluminum alloy head using six socket screws. The aluminum alloy head minimizes weight along with the carbon fiber construction of the tripod legs. Alternatively, a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with a separately-available TRB3475 75mm Tripod Bowl Insert can be installed within the aluminum alloy head. A video tripod head that is directly compatible with the TRB3475 tripod bowl insert or the TRBU75 tripod leveling base's 3/8"-16 mount can be used with the TR344L 34mm Series 71" Pro-Stix Carbon Fiber Tripod and oriented without adjusting the tripod's legs. For direct attachment of accessories that feature 1/4"-20 mounts such as the included bubble level, three 1/4"-20 female accessory threads are distributed along the sides of the head. Alongside each of those 1/4"-20 accessory threads are pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mount. To enhance stability, the underside of the top plate features an accessory loop which can accommodate the included carabiner along with a separately-available ballast such as a sandbag.Use and HandlingSupports up to 60 lbTripod heads, cameras, lenses, or sport optics that are compatible with a 3/8"-16 mount can be connected to the included tripod top plate, which is secured to the tripod's head using six socket screwsAlternatively, tripod accepts a separately-available ProMediaGear TRBU75 75mm Tripod Leveling Base with separately-available TRB3475 75mm Tripod Bowl InsertA video tripod head that is directly compatible with a separately-available ProMediaGear TRB3475 75mm Tripod Bowl Insert or the 3/8"-16 mount of the separately-available TRBU75 75mm Tripod Leveling Base can be used with the tripod and oriented without adjusting the tripod's legsCan be set for a minimum height of 3.8" to a maximum height of 71"Legs each feature four sections, twist locks for rapid deployment, and can be independently spreadLegs can be locked at 22.5°, 55°, or 89° anglesRubber feet with stow-away, metal spikes to further enhance stability on a wide variety of surfaces, including soft and uneven soilIncluded tripod bubble levelFor direct attachment of accessories that feature 1/4"-20 mounts, three 1/4"-20 female accessory threads distributed along the sides of the head1/4"-20 accessory threads along the head have adjacent pin slots that allow them to accommodate ProMediaGear accessories with anti-twist pins, or accessories with only a 1/4"-20 mountUnderside of the top plate features an accessory loop which can accommodate an included carabiner along with a separately-available ballast such as a sandbagWeighs 4.3 lb, measures 23.8" when folded5/32 hex key to adjust tension on leg hinges and for removal or installation of tripod top plateConstruction DetailsCarbon fiber legs with a maximum diameter of 34mmAluminum alloy tripod head helps minimize weightUPC: 609456715874